Finally, part 3 where we create the anchoring system, paint the cage (again…) and get this project installed.
DIY
I recently came across a FREE Toro mower on Craigslist! Great news! but, there was a reason that it was free… Read the rest of the article for how I fixed it in my own garage with a welder in about an hour.
Welding to Fix Push Mower Handle
I recently bought a 4×8 mesh bottom trailer off of craigslist and quickly realized I needed to add a jack and place to store straps. Check out the rest of the article to see what I came up with.
Adding Toolbox and Jack to tongue of Trailer
Part 2 of out A/C unit cage build where we build the side protection and paint it.
DIY A/C Unit Cage – Part 2
2 I have a buddy that recently got into rental houses and wanted to figure out a relatively cheap way to secure the outside Air Conditioning Unit. This is not only one of the most expensive parts of the rental house, but is also the easiest to steal during times when it […]
DIY A/C Unit Cage – Part 1
My buddy recently bought a piece of property with about 6 acres and a lot of fence in need of repair. He came to me with an idea for a receiver hitch mounted barbed wire stringer, so we built and it made the job go a lot faster. Read more […]
Build your own Receiver Hitch Barbed Wire Stringer
2 Talk about DIY Metal Fabrication. Ken Imhoff (not me 🙂 ) built a replica Lamborghini Countach from scratch in his basement! This is too cool not to share.