Check out this video on the system I came up with for hanging anything around the shop and move them without having to make any holes.
Custom
I got a 2015 Ford Expedition EL about 6 months ago. I absolutely love it but ever since I got it, I have had nowhere to put my tools that I usually carry with me. Most of the solutions I found were either really expensive or not practical for what […]
Ford Expedition Custom Rear Toolbox
Getting the new plasma cutter set up! Had to figure out how to get my air compressor up 8ft onto the mezzanine (it was interesting for sure). I also got the plasma table fixed and added a video for knowing which kind of proximity switch to buy PNP or NPN […]
Part 2 2×2 CNC Plasma Cutter
2 Adapting an LS engine to a TH350/TH400 is not only possible, but quite easy to do. Read more to see how with lots of pics!
How to adapt LS Engine to TH350 or TH400
1 Hey everybody. With the blizzard we got in KC I finally got enough snow to really test my receiver hitch snow plow out. Read more for results and lots of pics so you can build one too!
DIY Receiver Hitch Snow Plow – In Action
1 I recently moved into an office at work. Remembering that I had an old projector in the basement at home gave me an idea. I could use my projector at work, but didn’t have anywhere to mount it and couldn’t really drill holes in the desk or wall. Read more […]
DIY Magnetic Steel Desktop Projector Mount
1 Yes, I realize it is the middle of summer. But if you want to plow this winter, you gotta get ready while it is nice out! Now that we know the plow works, it is time to improve it. First up on the list is to add an easy way […]
DIY Receiver Hitch Snow Plow – Part 5
Part 4 We build a steel snow plow frame to attach to the receiver hitch lift. After painting, skinning, and assembling we actually got to plow some snow!
DIY Receiver Hitch Snow Plow – Part 4
Part 3! We fabricate a swivel mount for the plow and craft cutting edges from HDPE
DIY Receiver Hitch Snow Plow – Part 3
Check out Part 2 of our DIY Receiver Hitch Snow plow! It is time to weld some mounts for the winch to hook to, paint it, and wire it up so we can try it.
DIY Receiver Hitch Snow Plow – Part 2
For years, I have always wanted to make my own snow plow. Normally snow plows are huge heavy blades mounted on the front of heavy duty trucks. My unique problem is that I plan to mount it up to the receiver hitch of my little 3,000lb Honda Accord. Read more […]
DIY Receiver Hitch Snow Plow – Part 1
Finally, part 3 where we create the anchoring system, paint the cage (again…) and get this project installed.
DIY A/C Unit Cage – Part 3
I recently bought a 4×8 mesh bottom trailer off of craigslist and quickly realized I needed to add a jack and place to store straps. Check out the rest of the article to see what I came up with.
Adding Toolbox and Jack to tongue of Trailer
Part 2 of out A/C unit cage build where we build the side protection and paint it.
DIY A/C Unit Cage – Part 2
2 I have a buddy that recently got into rental houses and wanted to figure out a relatively cheap way to secure the outside Air Conditioning Unit. This is not only one of the most expensive parts of the rental house, but is also the easiest to steal during times when it […]
DIY A/C Unit Cage – Part 1
My buddy recently bought a piece of property with about 6 acres and a lot of fence in need of repair. He came to me with an idea for a receiver hitch mounted barbed wire stringer, so we built and it made the job go a lot faster. Read more […]