Step by step on how I made a custom lightweight rear bumper rack for my travel trailer that holds my 2000 watt generator, a can of gas, bike rack, and anything else that fits. I wanted something permanent that wasn’t flip down or attached to the thin sewer hose bumper that could rip off.
This is how I did it. Post your thoughts in the comments because I’m always up for learning!
Hope you enjoy!
🛠️GEAR IN THIS VIDEO:
2000 watt generator cover: https://amzn.to/3DeTuC1
Master Lock cable lock: https://amzn.to/41zkTZa
6″ weld on trailer hitch: https://amzn.to/3ZBqfRg
Horizontal bandsaw: https://amzn.to/3OVf2Gc
Hobart Handler welder (the newer version of mine): https://amzn.to/3P3cCoR
Microair EasyStart: https://amzn.to/3VHYANs
🧰 ESSENTIAL TOOLS:
THE BEST source for quality German tools: https://bit.ly/3SYKyGz
THE BEST pliers in the world sold by KC Tool: https://bit.ly/3MXF0Io
🎥 GREATEST HITS:
Hustler Mower Throwing Drive Belts? https://youtu.be/p_-S4QGsdqw
Pole barn insulation part 1: https://youtu.be/LH5v0VP4wHY
Pole barn insulation part 2: https://youtu.be/64olnZc0xcA
➡️FOLLOW DIYMETALFABRICATION:
https://www.facebook.com/DIYMetalFabrication
https://www.instagram.com/diymetalfabrication
ABOUT DIYMETALFABRICATION:
Starting in 2013 https://www.DIYMetalFabrication.com was created to share Tips, Tricks, and Tools with the Home Metal Fabricator. That’s YOU! We started as a blog but have moved over to video to serve you better, all the classic content is still available over on the blog though.
Disclaimer: If you click any of the affiliate links above, we may earn a small commission. Thank you for your support!
***This channel is for entertainment purposes only. We share our opinion of what works for us, but you should do your own research! Anything you try is at your own risk.***