DIY METAL FABRICATION .com

Tips, Tricks, and Tools for the Home Metal Fabricator

36

DIY Reinforcing Members Mark 4 Burner Griddle — A fun little project I just completed was reinforcing a Members Mark brand 4 burner griddle to prevent future warpage. The more expensive BlackStone griddles already have this reinforcement. Money saved with same end result = Winning. TL;DR Too Long; Didn’t Read (Wifey just taught me about this so I […]

DIY Reinforcing Members Mark 36″ 4 Burner Griddle

April 11, 2020 in FABRICATION PROJECTS tagged 36 / 4 burner / Angle Iron / BlackStone / Griddle / Grill / Members Mark / Propane / Reinforce / Warp / Warpage / Weld by Paul

DIY Mower Deck Repair Welding Patches — It is tough when you have a mower that still runs good but is starting to rust out. This mower was still working fine, but the deck had a couple of large holes in the front due to rust. Read more to see how we got it fixed and back […]

DIY Mower Deck Repair – Fixing Rust and Patching Holes

March 26, 2020 in FABRICATION KNOWLEDGE / FABRICATION PROJECTS / MISCELLANEOUS tagged 36 / 42 / 54 / Deck / Dixon / Hole / MIG / Mower / Patch / Repair / Riding / Rust by Paul